Routine maintenance and upkeep of flat mask machines is very important. We usually perform irregular maintenance on the mask machine, which can make the mask machine work more efficiently, and also greatly improve the safety of workers at work. So in detail, how do we maintain the mask machine?

The flat mask machine can be maintained according to the following aspects. During the maintenance process, it is necessary to shut down the power supply

1. Ultrasonic system

We need to check in advance whether the system of the ultrasonic mask machine is kept clean at all times, especially the ultrasonic electric box, welding head and vibrator must be kept dry and clean. We need to frequently check whether the connecting wire is firm and neat. In addition, we check The degree of wear of the ultrasonic welding head also requires attention to the changing range of the voltmeter and ammeter pointers on the ultrasonic box.

2. Pneumatic system

The air filter cup of the mask machine equipment needs to be checked to see if there is any water leakage. By the way, drain the air compressor. For areas with high humidity, the air compressor needs to be drained every day to check whether there are air leaks in all air pipes and cylinders. Ensure that the equipment can operate normally when working.

3. Appearance

Our masks are worn on the face, and medical masks need to follow the doctor into the operating room. Therefore, the production of masks requires very high requirements for the cleanliness of the mask machine equipment. Therefore, basically we need to wait until after get off work. , arrange some specialized cleaning personnel to clean and maintain the mask machine equipment. Clean equipment countertops and plates holding masks. However, it should be noted that the equipment cannot be washed directly with water. In this case, you need to use alcohol or some volatile cleaning fluid to clean the mask machine.

4. Electrical system

Check whether the circuit connector of the mask machine is loose, whether the main power cord and branch signal lines are worn or aged, whether the power cord is in a dry environment, and whether the exhaust fan on the equipment can work normally.

5. Transmission system

The transmission system includes major components such as motors, gears, reducers, sprockets, chains, and conveyor belts. We need to check in time whether there is dust or other items that affect heat dissipation on the motor, whether the gears and sprockets are oiled, if there are really some attachments, they need to be cleaned up, whether the tightness of the chain is appropriate, and whether the transmission components are properly spaced. Check whether the connecting screws are loose and whether the lubricating oil of the reducer is enough. Normally, we need to replace the machine equipment every 1000-1500 hours.

6. Anti-rust

Corrosive liquids and objects, including sweat, are not allowed to stick to the flat mask machine equipment. Because sweat can easily cause parts on the equipment to rust. If the equipment is not working for a long time, it is necessary to apply anti-rust oil on the transmission system and rust-prone parts of the mask.